TREND Department
Page 24 of 808 |
First 10
|
Previous 10
|
Next 10
|
Last 10
|
Trend Chamfer V Groove A=45 degrees X 32mm Dia |
 |
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. specification:. D=32mm. C1=15mm c2=22mm. A=4 ...more.
Price : £39.95
|
Trend Chamfer V Groove A=45degrees X 38mm Dia |
 |
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. specification:. D=38mm. C1=19mm c2=26.5mm. A ...more.
Price : £37.95
|
Trend Chamfer V Groove A=45 degrees X 51mm Dia |
 |
Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. For stationary machines - 18000 rpm recommen ...more.
Price : £84.95
|
Trend Mortar Groove/Large Cham A=45 degrees |
 |
Use for producing mortar grooves and for bevelling applications. specification:. D=41mm. C1=22.5mm c2=23mm. A=45 degrees. Shank diameter=1/2 inch. tre ...more.
Price : £40.95
|
Trend Mitre Corner A=135 degrees X 51.3mm Dia |
 |
This cutter makes a lapped mitre joint. Thickness min. 15mm -max. 18mm. For stationary machines at 18000 rpm. specification:. D=51.3mm. D=10mm. C=23mm ...more.
Price : £93.95
|
Trend Mitre Corner A=45¡ X 35Mm Dia |
 |
This cutter makes a lapped mitre joint. Thickness min. 15mm -max. 18mm. For stationary machines at 18000 rpm. specification:. D=35mm. D=15mm. C=25mm. ...more.
Price : £74.95
|
Trend Bevel 24Mm Dia X 25Mm Cut |
 |
Especially designed bevel cutter for routing corian, which is used in many bathrooms and kitchens. specification:. D=24mm. C=25mm. Shank diameter=1/2 ...more.
Price : £41.95
|
Trend Bevel 24Mm Dia X 25Mm Cut |
 |
Especially designed bevel cutter for routing corian, which is used in many bathrooms and kitchens. specification:. D=24mm. C=25mm. Shank diameter=12mm ...more.
Price : £41.95
|
Trend Bevel 23M Dia X 25Mm Cut |
 |
Especially designed bevel cutter for routing corian, which is used in many bathrooms and kitchens. specification:. D=23mm. C=25mm. Shank diameter=3/8 ...more.
Price : £55.95
|
Trend Tapered 12.7Mm Dia X 32Mm Cut |
 |
Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release ...more.
Price : £33.95
|
